Click photo to enlarge

One of the latest concepts in window blinds is ISOdesign. Available in the form of a venetian or pleated blind, ISOdesign is an exceptional accompaniment for modern uPVC windows and doors. Certain types of blinds are often incompatible with these windows, as too much movement or handles can cause unwanted problems. ISOdesign eliminates these problems in such a way, that they are fast becoming one of our most popular products.

As ISOdesign remains tensioned at all times, it is perfect for ‘Tilt an Turn’ windows. Even when tilted fully open, the blind will stay flush against the glass and above all, operational. This important benefit allows the user to open windows and let in cool air, whilst still being able to control the amount of light accessing the room and the tension wires will retain the blind in place, even during slight gusts
of wind.

Manufactured with an ultra slim head rail that fits neatly into the beading, the blind operates along nylon guide wires that are fixed into the bottom of the window frame and then tensioned inside the head rail. As the majority of the blind sits within the bead depth and up against the glass, handles do not affect operation, as the blind passes behind them with ease.

The head and bottom rails for ISOdesign blinds come in four colours, white, dark brown, light brown and light grey and no brackets are required, as the head rail fixes directly onto the face of the window frame. So, if the intended window is of the same colour the hardware will blend in, whilst the only noticeable part of the blind will be the slat colour.

Venetian ISOdesign venetians are available in 16mm or 25mm slat widths in any of the colours and designs from our venetian blind range. A single beaded mono-control chain, on the left or right hand side, will not only raise and lower the blind, but tilt the slats to the desired angle as well and a small cleat is provided to secure the chain to the window frame when it is not in use.